More informations on products
| Machining steels | 20-45 m/min | Recommended |
| Structural and cementation steels | 20-45 m/min | Recommended |
| Carbon steels | 7-25 m/min | Recommended |
| Alloy steels Rm<850 N/mm² | 20-45 m/min | Recommended |
Alloy steels 850| 7-25 m/min |
Recommended |
|
| Stainless steels (with good machinability) | 7-25 m/min | Suitable |
| Anstenitic stainless steels | 5-12 m/min | Suitable |
| Ferritic and martensitic stainless steels | 5-12 m/min | Recommended |
| Cast irons | 9-20 m/min | Suitable |
| Speroïdal graphite and malleable cast irons | 12-30 m/min | Suitable |
| Alloy cast irons | 5-12 m/min | Suitable |
| Non-alloyed aluminium | 15-35 m/min | Suitable |
| Aluminium alloys with Si<1,5% | 30-60 m/min | Suitable |
| Thermoplastics | 15-30 m/min | Suitable |
P2003 TiCN M
105 UNC
Available
